Hand-Cut Alabaster Petals · Brass Armature · Three-Tier Pendant
A three-tier alabaster chandelier in a sculptural neoclassical vocabulary — overlapping hand-cut alabaster petals arranged in graduated tiers around a polished brass armature, descending from a brass canopy bell. Each petal is cut from solid alabaster with the natural rough edge preserved at the outer rim and the smooth face turned inward, lit from above so the natural cream-and-amber veining reads luminous through every petal.
Hand-cut alabaster panels and a chased brass armature; veining, edge profile, and translucency vary panel to panel. Suited to formal dining rooms, primary entry foyers, two-story foyers, primary-suite seating areas, and great-room interiors in 5,000+ sq ft estates and luxury hotels — for design-led clients drawn to the sculptural alabaster pendant vocabulary in transitional and neoclassical interiors.
Why This Fixture
Hand-Cut Solid Alabaster
Each petal cut from a solid alabaster block with the natural rough edge preserved at the outer rim. Veining and translucency are unique to every petal.
Three-Tier Composition
Graduated tiers of overlapping petals around a polished brass armature — reads as a single sculptural form rather than discrete pieces.
Polished Brass Armature
Chased and polished brass canopy, chain, and internal armature visible through the alabaster — period-correct metal for natural-stone lighting.
Finish
Polished Brass & White Alabaster
Hand-cut white alabaster with natural cream-and-amber veining; chased polished brass armature. Single standard finish — every fixture differs at the petal level.
Hand-cut alabaster — every piece is unique. Veining, edge profile, and translucency vary panel to panel; your fixture will not match the photos at the petal level.
Reinforced ceiling support recommended. Approx. 25–40 kg (55–90 lbs) assembled — your electrician should anchor to a joist or use a code-rated fixture brace.
Product Notes
| Form | Three-tier alabaster pendant chandelier · graduated tiers of hand-cut alabaster petals on a polished brass armature |
| Material | Hand-cut solid alabaster panels · cast and polished brass armature, canopy & chain |
| Finish | Polished brass with white alabaster (single standard finish) |
| Dimensions | Ø 31.5″ × H 19.7″ (Ø 80 × 50 cm) |
| Hanging Chain | 12″ (30 cm) supplied · longer drop available on request |
| Light Source | E12 or E14 candelabra socket · bulbs not included |
| Recommended Bulb | E12/E14 clear candle LED, 2700K warm white, ≤ 25W incandescent equivalent · clear envelope reads best through alabaster |
| Dimming | Standard wiring is non-dimming · TRIAC-dimmable on request · Lutron-compatible |
| Voltage | 110–120V US standard · 220–240V on request |
| Mounting | Hardwired ceiling pendant via supplied canopy plate & chain |
| SKU | RDC-150210 |
| Best For | Formal dining rooms · primary and two-story foyer entries · primary-suite seating areas · great-room interiors in 5,000+ sq ft estates · luxury hotel suites and presidential suites · transitional, neoclassical, and contemporary interiors |
| Trade & Project | Designer specification packets, trade pricing, and project-quantity coordination available — contact our trade desk |
Installation
- Licensed electrician required. Hardwired ceiling pendant via supplied canopy plate and chain.
- Specialist installer recommended. Alabaster is a soft mineral — handle the petals with care during un-crating; lift only by the brass armature, never by individual petals.
- Hang the lower edge 30–34″ above the dining table, or 7 ft+ above the foyer floor in walking zones.
- Confirm ceiling support. 25–40 kg exceeds standard junction-box rating — code-rated fixture brace or joist anchor required.
- Care: dust the alabaster with a soft dry cloth only. Do not use water, glass cleaner, or any liquid — alabaster is porous and will stain. For fingerprints use a dry chamois.
Downloads
Frequently Asked
What size dining table or room does it suit? +
The Ø 31.5″ shade suits dining tables 60–82″ long — typical of seating for 6 to 10. Chandelier diameter should sit between half and two-thirds of dining-table width. For primary foyers, the fixture suits 9–12 ft ceilings; for taller foyers and two-story drops, longer chain is available on request. Hang the lower edge 30–34″ above the dining table top measured from the finished surface.
How heavy is it and what ceiling support do I need? +
Approximately 25–40 kg (55–90 lbs) assembled — at or above standard residential junction-box rating. Your electrician should install a certified heavy-duty fixture brace or anchor to a structural joist before mounting. Contact us for confirmed shipping weight before installation if structural review is needed.
Will my fixture match the photographs? +
The brass armature and silhouette are made to consistent specification — your fixture will read identically in form. The alabaster, however, is hand-cut from natural blocks: veining patterns, exact petal edge profile, translucency, and minor mineral inclusions differ between every panel. The fixture you receive will sit within the same visual language as the photographs but will be visibly distinct at the veining level — the character of natural alabaster.
What bulbs should I use? +
E12 or E14 candelabra-base bulbs (US E12 is the standard), supplied by your installer. We recommend clear-envelope candle LEDs at 2700K, ≤ 25W incandescent-equivalent. Clear glass reads best through alabaster — frosted bulbs flatten the natural glow and are not recommended. Bulb count is confirmed on the spec sheet.
Is it dimmable? Lutron-compatible? +
Standard wiring is non-dimming. TRIAC-dimmable wiring is available as a custom build — please specify when contacting us. Compatible with Lutron Caséta, Diva, and forward-phase wall dimmers when paired with dimmable LED bulbs. See our dimming protocols guide.
How do I clean the alabaster? +
Dust with a soft dry microfiber cloth only. Do not use water, glass cleaner, ammonia, vinegar, or any liquid cleaner — alabaster is porous and water will discolor or stain the surface. For fingerprints use a dry chamois. Keep the fixture away from high-humidity rooms (steam-shower baths, immediately above stovetops) to preserve the stone over time.
Downloads
Need a different document? Ask a designer — sent within 1 business day.
FAQ
What are the exact dimensions of the Gloire Alabaster Chandelier?
The chandelier measures 80 cm diameter × 50 cm height (31.5″ × 19.7″). The hanging chain is 12″ (30 cm) supplied, with longer drop available on request.
What materials is this chandelier made from?
Hand-cut solid alabaster petals with natural cream-and-amber veining arranged in three tiers around a cast and polished brass armature and canopy.
What style is the Gloire Alabaster Chandelier?
This is a farmhouse, coastal, glam, traditional, and modern contemporary chandelier with neoclassical vocabulary — overlapping hand-cut alabaster petals in graduated tiers.
Which rooms is this chandelier suited for?
Formal dining rooms, entry foyers, staircases, primary bedrooms, living rooms, and offices in estates and luxury interiors.
How is the chandelier installed?
Hardwired ceiling pendant via supplied canopy plate and chain. A licensed electrician and specialist installer are required. Reinforced ceiling support and anchoring to a joist or code-rated fixture brace is recommended — the assembled fixture weighs approximately 25–40 kg (55–90 lbs).
Still unsure? Ask a question — answered within 1 business day.
- Unique shape design
- Made responsibly
- High quality material
- Tested for durability
CARE
CARE
- Dust with a soft, dry cloth.
- To protect finish, we do not recommend the use of household cleaners or abrasives.
- Do not exceed specified wattage.
SHIPPING & RETURN POLICY
SHIPPING & RETURN POLICY
Enjoy free shipping on all products. With Front Door Delivery, your item ships from our Distribution Center via UPS within 2–3 business days and arrives at your home in 4–6 weeks. Eligible items may be returned within 30 days of receipt. Made-to-order items are not eligible for return.
In our workshop
Made to order, shipped insured
Every fixture is built or cut when you order it — 2–4 business days for metal, 3–5 for stone, 3–4 weeks for hand-blown glass. Then sea freight, customs handled by us, tracked to your door in about 4–6 weeks. Need it sooner? Express air, 1–3 weeks, priced at checkout.
Made your way
Nothing here is fixed
Change the finish, the colour, the stone, the size — or send us a shape.
Design services
Free whole-home lighting plans
Send floor plans or photos; a Radilum designer returns a room-by-room plan with fixture, size and mounting height — usually within 2 business days.
Fast Shipping
4-6 weeks for delivery
North American Certification
North American Certification Overview
Safety Payment
Secure payment with Multiple Credit Cards.
The alabaster story
Quarried in Spain, glowing from within
Spanish alabaster is a soft, translucent stone. Cut into shades a few millimetres thick, it turns an LED into a warm, even glow with the veining floating inside. Each shade is cut from its own block, so tone and pattern differ slightly from piece to piece — that is the material, not a fault.
Sculpted by earth,
softened by light.
Rare natural alabaster, hand-carved by master artisans and illuminated from within. Every piece is unrepeatable — a singular convergence of geology and craft.
"Alabaster does not merely hold light — it breathes with it, casting a warmth that cannot be manufactured, only discovered."
Formed through millions of years of slow crystallisation, alabaster is among the world's most ancient decorative stones. When illuminated, it yields a quiet, golden luminosity — gentle, organic, irreducibly human. Our collection exists to honour that rarity, designing forms that allow the stone to speak without interruption.
No two stones
are ever alike.
Alabaster carries within it a geological autobiography — millions of years compressed into veining, crystalline structures, and tonal shifts that no craftsman could plan or replicate. Five expressive patterns emerge most consistently in our collection.
Pure
Clear SurfaceA near-uniform honey surface with barely perceptible variation — the rarest and most meditative expression of the stone.
Ink Marbling
Flowing VeinsSoft, fluid grey veining reminiscent of East Asian ink painting — atmospheric, unhurried, deeply contemplative.
Lightning Veins
Sharp BranchingBold, branching mineral lines that fracture the surface with dramatic precision — striking from any angle and in any light.
Ice Crack
Angular FracturesGeometric fissures suspended within the stone — sculptural formations that diffuse and scatter light with quiet drama.
Snowflake
Crystalline FlecksSuspended constellations of lighter crystalline matter — a delicate drift across the surface that catches light from within.
Natural Variance Is Not a Defect
Because alabaster is a living natural stone, every piece carries its own unique veining and tonal variation — a quality we celebrate rather than suppress. We are unable to specify, select, or replicate any particular pattern. Ink marbling, lightning veins, ice-crack formations, and snowflake inclusions are inherent characteristics of the material and do not constitute a quality issue. If you prefer a perfectly uniform finish, this collection may not align with your expectations — and we kindly invite you to consider this before placing your order.
One material,
every room in the home.
From the grandeur of a double-height chandelier to the intimate glow of a bedside lamp — alabaster scales with intention, adapting to every room's rhythm without sacrificing presence.
Five stages of
quiet craftsmanship.
Every alabaster lamp begins as raw stone and arrives in your hands only after passing through a sequence of precise, unhurried steps — performed by artisans who know how to listen to the material before they shape it.
Material Selection
Rough blocks are hand-assessed at the quarry for translucence, structural integrity, and depth of colour within.
Precision Cutting
Diamond instruments slice the stone into workable panels, guided by its natural grain rather than against it.
Sculpting
Artisans turn, carve, and hollow each form by hand — responding to the stone's character as it is revealed.
Hand Polishing
Progressively finer grits refine the surface until the stone's interior luminosity is fully realised.
Final Assembly
LED modules, solid brass fittings, and hand-finished hardware are fitted and inspected — each piece individually, never in batches.
Seventeen finishes for the
metal that holds the stone.
Every alabaster fixture is completed by its metalwork — the canopy, stem, arms, and fittings that carry the stone and frame its glow. Each is available in seventeen numbered finishes from the Radilum Finishes Library: brass, bronze, iron, steel, nickel, and chrome characters, hand-applied and sealed, or a custom patina grown to match a sample you send us.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
Finishes 01–17 · brass, bronze, iron, steel, nickel, chrome, black · custom patinas matched on request
Order by number, not by name. "Antique brass," "aged brass," "burnished brass" — ask five workshops what those mean and five different metals come back. Finish 04 is the same physical sample in our studio, on the atelier bench, and on your packing list.
And because no screen renders metal honestly, we ship the physical panels before anything is committed. Hold them against your alabaster's veining, your cabinetry and wall paint, at the hour you actually use the room — then send the number.
To own an alabaster lamp is to welcome a piece of natural sculpture into your home — shaped by the earth over millennia, refined by artisans over weeks, and completed only in the moment it is illuminated.
Radilum Design Studio
Treat it as the
rare object it is.
Alabaster is genuine natural stone — each fixture carries substantial weight and deserves the same careful handling you would extend to any fine sculpture. A few simple practices will preserve both piece and electrical integrity for a lifetime.
-
01Never lift by the power cord.The cord is not load-bearing. Tension applied to it can damage internal LED wiring and lead to connection failure over time.
-
02Always support the stone body.Cradle the fixture with both hands when moving or installing. For larger pieces, two people are strongly recommended.
-
03Clean gently; dust often.A dry, soft cloth is all that is needed. Avoid water, solvents, and abrasives — they will dull the polished surface irreversibly.
See it in motion.
Alabaster Sconce
Alabaster Chandelier
Size chart
| Size |
| area XS |
| Room XS |
| Size | DIA 2"-6" | DIA 6"-12" | DIA 12"-18" | DIA 20"-24" | DIA 24"-32" | DIA 32"-40" |
|---|---|---|---|---|---|---|
| area | 32-54 FT | 54-107 FT | 107-161 FT | 161-215 FT | 215-269 FT | 269-378 FT |
| Room | BATHROOM/AISLE | DINING ROOM | KITCHEN | BEDROOM | LIVING ROOM | COMMERCIAL INTERIOR |
* Sizes are American and expressed in inches.
Sizing a chandelier
Add the room’s length and width in feet — that number in inches is a comfortable diameter. Then check the ceiling can carry the weight.
Complete the room
Pieces that live well with the Gloire
From the same Alabaster Chandelier line — chosen so the room reads as one.
Photos simply can't capture its beauty! It's truly gorgeous! It looks much more expensive than we actually paid. I highly recommend this chandelier if you want to elevate the style of your room.
It completely transformed my dining room! It matches our decor perfectly. Excellent quality.
This chandelier is truly stunning! Made of natural alabaster, the design is modern yet elegant! We love this chandelier and will definitely buy a few more for our other bedrooms!
I'm completely captivated by this chandelier. I installed it at the entrance to my master bedroom, and the effect is simply amazing. The quality is also excellent.
It looks beautiful whether the light is on or off. Installation is also very simple; it only takes a little time to assemble each alabaster component.
Absolutely stunning!!! The warm light is just right, and the alabaster material is gorgeous. Although assembling the individual parts took quite a bit of time, it was definitely worth every penny!
Although it hasn't been installed yet, I've been eagerly anticipating this chandelier, so I disassembled all the parts to check them out, and they look to be of excellent quality.
My wife absolutely loves this chandelier! It's affordable, the product quality is superb, and we're really looking forward to installing it in our new home.
While assembling all the parts did take a considerable amount of time, it was absolutely worth the price! It looks beautiful whether the light is on or off.
What a beautiful light fixture! It adds a soft, natural touch to my traditional dining room. Excellent value for money! A perfect upgrade from my previous light fixture. Installation was also very easy.
This chandelier is gorgeous! The alabaster looks especially beautiful under the light, adding a bright touch to my dining room. I'm very satisfied with this purchase!
I love this beautiful chandelier. The light fixture is of superior quality, and the packaging was excellent, with no damage whatsoever.
It's so beautiful! The quality of the chandelier is amazing. And each piece is unique, feeling like it was custom-madevery high-end. Highly recommended!
Recently viewed
Welcome offer
Ten percent off your first order
Enter the code at checkout. Applies to the full order, including custom finishes.
Trade & designers
Trade Program
Net pricing on every fixture, finish samples, 3D models and a dedicated project contact — for interior designers, architects, hospitality and developers.
Apply for a trade account