Latão · Vidro em Forma de Flor · Luminária de Teto Pós-moderna
Pétalas de vidro esculpido irradiam-se de um chassis central em latão — uma luminária de teto pós-moderna que funciona também como um centro de interesse discreto. A luz difusa passa através de cada sombra em forma de flor, criando um brilho tridimensional e acolhedor. Perfeita para quartos, escritórios, varandas e corredores.
Veja em Ação
Visão geral da luminária
Configuração — Escolha no Checkout
3 Cabeçalhos
D 35 × A 16 cm
∅ 13.8″ × H 6.3″
4 Cabeças
D 45 × A 17 cm
∅ 17.7″ × H 6.7″
6 Cabeçalhos
D 60 × A 19 cm
∅ 23.6″ × H 7.5″
Acabamento de Metal — Escolha na Finalização da Compra
Ouro antigo acolhedor — clássico e radiante.
Branco mate suave — limpo, minimalista, combina com paredes claras.
Materiais e Acabamento
Estrutura em Latão
Corpo metálico central — o núcleo estrutural acolhedor do qual as sombras irradiam.
Sombras de Vidro em Forma de Flor
Pétalas de vidro esculpidas — cada uma difunde a luz para criar um brilho tridimensional.
Perfil Baixo para Teto
Encosta-se ao teto — ideal para quartos, escritórios e pés-direitos convencionais.
Notas do Produto
| Dimensões do candeeiro | 3 Cabeças: D 35 × A 16 cm / ∅ 13.8″ × A 6.3″ 4 Cabeças: D 45 × A 17 cm / ∅ 17.7″ × A 6.7″ 6 Cabeças: D 60 × A 19 cm / ∅ 23.6″ × A 7.5″ |
| Material da estrutura | Latão com acabamento refinado |
| Material da esfera | Vidro |
| Acabamentos de metal | Latão · Branco |
| Número de lâmpadas | 3, 4 ou 6 (conforme a configuração) |
| Tipo de casquilho | E26 ou E27 base média (Edison) |
| Lâmpada incluída | Não — vendida separadamente |
| Tipo de montagem | Aplique de teto semi-embutido · Ligação fixa |
| SKU | RDC-X3028 |
Instalação
- Instalação de tecto fixa — recomenda-se um electricista licenciado.
- Adequa-se a uma caixa de junção de teto padrão redonda. Todo o ferragemdde montagem está incluído.
- Perfil semi-embutido — a luminária fica junto ao teto (queda de 16–19 cm consoante a configuração).
- Concebido para tetos planos. Não recomendado para tetos inclinados ou abobadados.
- Adequado para locais interiores secos e húmidos. Não classificado para zonas húmidas/chuveiro ou uso exterior.
FAQ
Que lâmpadas recomenda? +
Lâmpadas LED de base média E26 (América do Norte) ou E27 (EU/UK) em branco quente (2700K), 4–6W cada (≈40–60W equivalente a incandescência). As lâmpadas esféricas fosco ou opalescente oferecem o brilho mais suave através do vidro esculpido; as lâmpadas de filamento transparente criam mais brilho e destacam as formas de pétalas.
Que configuração devo escolher? +
A configuração de 3 cabeças (35 cm / 13,8″) é ideal para quartos pequenos, entradas e varandas. A de 4 cabeças (45 cm / 17,7″) encaixa em quartos médios e escritórios. A de 6 cabeças (60 cm / 23,6″) funciona bem em quartos maiores, corredores e áreas de estar principal onde deseja maior luminosidade ambiente.
Este aparelho é atenuável? +
O candeeiro é compatível com dimerzação. Combine lâmpadas LED dimerizáveis E26/E27 com um interruptor dimmer compatível com TRIAC (p. ex. Lutron, Leviton Decora). Lâmpadas padrão não dimerizáveis funcionarão apenas a brilho máximo.
Que altura de tecto é apropriada? +
Todas as três configurações são semi-embutidas com queda de 16–19 cm, portanto funcionam em qualquer teto padrão a partir de 2,4 m (8 pés). Para tetos muito baixos (abaixo de 2,4 m), escolha a configuração mais pequena de 3 cabeças.
Posso instalá-lo num teto inclinado? +
Recomendamos a instalação apenas em tetos planos. Como se trata de uma montagem semi-embutida, o cânula precisa ficar junto ao teto para se montar com segurança. Para tetos inclinados ou abobadados, escolha uma luminária suspensa com corrente ou haste regulável.
Como limpo o vidro em forma de flor? +
Depois de as lâmpadas arrefecerem, limpe suavemente cada cúpula de vidro com um pano macio sem pêlo. Para pó retido nas reentrâncias das pétalas, use uma escova macia. Para marcas teimosas, um pano húmido com água e sabão suave é adequado — seque bem a seguir. Evite produtos abrasivos, que podem arranhar o vidro ou opacificar o acabamento do metal.
Transferências
- Unique shape design
- Made responsibly
- High quality material
- Tested for durability
CARE
CARE
- Dust with a soft, dry cloth.
- To protect finish, we do not recommend the use of household cleaners or abrasives.
- Do not exceed specified wattage.
SHIPPING & RETURN POLICY
SHIPPING & RETURN POLICY
Enjoy free shipping on all products. With Front Door Delivery, your item ships from our Distribution Center via UPS within 2–3 business days and arrives at your home in 4–6 weeks. Eligible items may be returned within 30 days of receipt. Made-to-order items are not eligible for return.
10%
OFF
Use this code at checkout to enjoy a 10% discount on your entire purchase.
Flower Shape Glass Ceiling Lamp
Twenty to twenty-four panels of opal glass, set in two tiers and held in a hand-formed brass frame, drawn together into a single blooming form. A flush mount that reads as a fixture in the daytime and as a soft lantern at night.
Drawn from a flower, built like a lantern
Each panel is cut to a petal curve and set in two tiers, ten or twelve to a ring, so the seams between them become the design. The brass lines meet at the centre finial, so the lamp looks resolved from every angle in the room.
- Scalloped outlineThe edge softens the rectangle of a ceiling; it suits period rooms and modern ones alike.
- Low profile16–19 cm tall. Works under a 2.4 m ceiling without crowding the space.
- Brass finialA turned drop at the centre finishes the form and hides the fixing.
- Proportion by head count3 heads carry 20 panels (10 + 10); 4 and 6 heads carry 24 (12 + 12). The diameter grows, the petal rhythm stays.
Two materials, chosen to age well
The frame is solid brass strip, not plated steel. The panels are opal glass, not acrylic. Both are materials that look better after ten years than on day one.
Solid brassBrass frame
Cut from solid strip, bent by hand to each petal radius and soldered at the joins. Brass does not rust, holds its colour indoors, and can be polished back if you ever want it brighter.
Opal glassOpal white glass
Milk-white glass diffuses the bulb into an even glow with no hot spot. It will not yellow, does not scratch like plastic, and wipes clean with a cloth.
Six steps, one pair of hands each
Every lamp crosses six benches in our workshop, and a different pair of hands owns each one. The order never changes; the people have made this lamp hundreds of times.
Pressing the channel
Flat brass strip is run through the press and folded into a U-channel: the groove that will grip each glass edge. Get this wrong by half a millimetre and the panel rattles.
Polishing
Each brass channel is polished on the wheel before it is joined, so every petal edge reads as one clean, continuous line.
Soldering
Channels are cut to length, bent to the petal radius and soldered into two rings, ten or twelve petals each. Every joint is done by hand with a torch, then dressed flush.
Fitting the glass
Opal glass panels are seated into the channels one at a time, and the frame is closed around them. This is the moment the flower takes shape.
Washing
Flux, fingerprints and polishing residue are washed off the finished body so the finish takes evenly and the glass is spotless.
Finishing the brass
The frame is toned by hand to the antique brass colour, sealed, then wired, lit and checked before packing.
Two minutes on the bench
We filmed the lamp being made. No narration; just the sound of brass and glass.
Soft in the evening, quiet by day
Opal glass spreads light across the whole petal, so the ceiling picks up a warm wash rather than a spotlight.
Rooms that ask for it
Flush mounts carry a room's ceiling. This one suits places you pass through often and places you rest in.
Made in batches, finished one at a time
This is one of our most-ordered ceiling lamps. Each batch you see here goes out to homes on three continents.
“Heavier and better made than I expected. The brass has a real depth to it.”Verified buyer · 4-head
“Installed three in the upstairs hall. Guests always ask where they are from.”Verified buyer · 3-head
Three sizes, one silhouette
Match the diameter to the room. A good rule: add the room's length and width in feet, and read the sum as inches of lamp diameter.
A ceiling lamp you will stop noticing, and then miss
Ships in 3–5 days. 30-day returns. Use code RDSHN for 10% off.
Choose your sizeQuestions on fit or wiring? Message us before you order — we answer within a day.
Fast Shipping
4-6 weeks for delivery
North American Certification
North American Certification Overview
Safety Payment
Secure payment with Multiple Credit Cards.
Measuring for Pendant Lighting
When installing pendants and chandeliers, it’s important to consider how you want your fixtures to hang in relation to the other furnishings in your space. Read on for our recommendations on how to hang the perfect light.
Kitchen
Aim for 30–36″ from the bottom of your fixture’s shade to the top of your island or countertop. Space multiple pendants 26–30″ apart. For a sense of proportion and balance, allow 12″ from the outermost fixture to the edge of your counter.
Dining Room
For optimal lighting and visibility, the bottom of your pendant should sit 30″ from the surface of your dining table. To scale your fixture, take the length and width of the room in feet, then convert that to inches. For a 10′ by 14′ room, the chandelier should be about 24″ wide.
Bedroom
If you’re hanging a pendant above a nightstand, allow for at least 30″ between the bottom of the shade and your nightstand’s surface. To keep the look balanced, center your pendant over your nightstand.