Brass · Conical Fabric Shade · Long-Reach Arm
A long-reach swing-arm wall lamp in classic library / billiards-room vocabulary. A triangular brass armature extends 85 cm from the wall to support a conical fabric shade — long enough to cast light over a sofa, reading chair, billiards table, or wide console without crowding the wall behind it.
The arm pivots on its wall mount, letting you swing the shade through a wide arc to illuminate different parts of the room. The conical shade is trimmed at the base for a refined finish; the brass body is hand-aged with subtle tonal variation across each piece.
See It In Action
Features
85 cm Reach
Long triangular arm extends nearly a meter from the wall — covers wide reading zones.
Pivoting Arm
Swings through a wide arc to direct light where it's needed.
Conical Fabric Shade
Diffused fabric cone with trim detail — warm, glare-free downlight.
Finish Options — Choose at Checkout
Antique Bronze
Vintage patinated brass — warm, traditional.
White
Powder-coated white — clean and minimal.
Black
Matte black — graphic, contemporary.
Satin Nickel
Brushed nickel — cool, modern.
Dimensions
Plan for the long reach. At 85 cm (33.5") from wall to shade center, this is a longer-reach sconce than typical wall lights. Make sure the swing arc clears nearby furniture, doors, and adjacent fixtures. Best installed at a height that puts the shade roughly above seated eye level — ~150–170 cm (60–67") from the floor.
Specifications
| SKU | RDW-084008 |
| Materials | Brass body and arm · Fabric conical shade with trim |
| Light Source | E26 / E27 socket · Bulb not included · User-replaceable |
| Recommended Bulb | LED E26/E27, max 25W · Warm white 3000K recommended |
| Color Temperature | Determined by your chosen bulb · Warm white 3000K recommended |
| Dimming | Compatible if a dimmable bulb and TRIAC dimmer are installed |
| Voltage | AC 110–240V · Universal |
| Adjustability | Pivoting wall arm — wide arc swing |
| Mounting | Hardwired wall-mount · Standard junction box |
| Best For | Reading chairs · Sofas · Billiards rooms · Library walls · Long consoles |
| IP Rating | IP20 · Indoor dry locations only |
Downloads
FAQ
How far does it extend from the wall? +
The full reach is 85 cm (33.5") from wall to shade center — significantly longer than a typical wall sconce. It's designed to project light out over furniture, billiards tables, or wide reading zones. The arm pivots, so when not in use you can swing the shade closer to the wall.
What bulb does it take? +
One E26 (North America) or E27 (EU/UK/AU) standard-base bulb up to 25W. We recommend a warm white (3000K) LED for the most period-appropriate glow. Bulb is not included.
Can I order it as a pair? +
Yes — this lamp is often installed in pairs flanking a sofa, billiards table, or library wall. Just order two units. For matched-batch finish consistency on larger orders, contact us first.
Where should I mount it? +
For reading or task lighting, install at roughly 150–170 cm (60–67") from the floor — that puts the shade above seated eye level. Above a billiards table or console, position it so the shade hangs roughly 70–80 cm (28–32") above the surface. Confirm the swing arc clears nearby walls and doors before final placement.
Downloads
Dimension drawings
Need a different document? Ask a designer — sent within 1 business day.
- Unique shape design
- Made responsibly
- High quality material
- Tested for durability
CARE
CARE
- Dust with a soft, dry cloth.
- To protect finish, we do not recommend the use of household cleaners or abrasives.
- Do not exceed specified wattage.
SHIPPING & RETURN POLICY
SHIPPING & RETURN POLICY
Enjoy free shipping on all products. With Front Door Delivery, your item ships from our Distribution Center via UPS within 2–3 business days and arrives at your home in 4–6 weeks. Eligible items may be returned within 30 days of receipt. Made-to-order items are not eligible for return.
In our workshop
Made to order, shipped insured
Every fixture is built or cut when you order it — 2–4 business days for metal, 3–5 for stone, 3–4 weeks for hand-blown glass. Then sea freight, customs handled by us, tracked to your door in about 4–6 weeks. Need it sooner? Express air, 1–3 weeks, priced at checkout.
Made your way
Nothing here is fixed
Change the finish, the colour, the stone, the size — or send us a shape.
Design services
Free whole-home lighting plans
Send floor plans or photos; a Radilum designer returns a room-by-room plan with fixture, size and mounting height — usually within 2 business days.
Fast Shipping
4-6 weeks for delivery
North American Certification
North American Certification Overview
Safety Payment
Secure payment with Multiple Credit Cards.
The iron & brass story
Cast, chased and finished by hand
Our brass and iron fixtures are cast, chased and finished in our own workshop — gold-leafed, bronzed or lacquered by hand, which is why no two carry exactly the same glow. Colour is grown in the finishing bath rather than sprayed on, then sealed to age gracefully. Choose a finish above, or ask for any other metal finish from the Finishes Library.
The metal that holds
the light of years.
Brass is the alloy civilisations reach for when they want light to last. Door pulls polished by three generations. Naval instruments still readable a century after the ship was scrapped. Church candelabra that outlive the parish. Radilum's American Brass Collection is built on that same expectation — fixtures forged from H65 cartridge brass, finished by hand, sealed against time, and meant to be the lamp your grandchildren still recognise.
The alloy that refuses to age.
Brass is a copper-zinc alloy whose first known smelting dates to roughly 500 BCE in the eastern Mediterranean — Greek artisans alloying calamine ore with native copper to produce a metal that struck like gold but bent like a tool. By the Roman imperial period, brass was the material of coinage, military fittings, and the household lamps that lit late-republic Rome. Two and a half millennia later it remains, by an enormous margin, the most-used non-ferrous engineering alloy on the planet — and the lighting industry's quiet workhorse.
What makes brass uniquely fit for lighting is a coincidence of properties no single-element metal achieves. Copper gives it warm chromatic depth and the specific red-yellow that reads as luxurious rather than industrial. Zinc hardens the alloy enough to hold sharp turned profiles, threaded fittings, and cast detail without the softness of pure copper or the dullness of grey castings. The blend produces a metal that is workable when you need it to be — and rigid for the next century.
Of the dozen brass grades available to manufacturers, Radilum specifies H65 cartridge brass — 65% copper, 35% zinc. The name comes from its original use: military shell casings, where the metal had to absorb the shock of firing without splitting. That same toughness, applied to a lamp arm, means the part stays dimensionally stable under decades of thermal cycling, hardware tightening, and bulb replacement. Lower-copper alloys (H62, H59) are cheaper but more brittle. We do not use them.
The Radilum brass collection is built on a simple recognition that the wider lighting industry has spent the last two decades forgetting: that the cost difference between a true brass fixture and a brass-plated zinc one is measurable in years of service, not dollars at checkout.
Four properties that change everything
about how a lamp ages.
Most fixture materials are chosen for what the lamp looks like in the showroom photograph. Brass is one of the very few materials that earns its place over the next thirty years. The differences come down to four physical and aesthetic properties.
01 Mass that reads as quality
Solid H65 brass has a density of 8.5 g/cm³ — denser than steel, denser than cast iron, more than three times the weight of zinc-die-cast. A brass sconce of comparable size to a brass-plated zinc one will weigh nearly four times as much. You feel the difference the moment you lift the box. It's not marketing — it's chemistry.
02 Living finish, not a coating
Brass-plated finishes are paint that happens to be metallic. They scratch, chip, and reveal cheaper alloy underneath. Solid brass is the finish — what you see is the metal itself, polished or patinated. A scratch on plated brass is a flaw; a scratch on solid brass is a wear mark that polishes back out. This is why brass instruments survive a century of touring while plated hardware ages out of fashion in five years.
03 Naturally antimicrobial
Copper alloys are oligodynamic — meaning their surface ions disrupt microbial cell membranes on contact. The EPA registers solid brass and bronze as antimicrobial surfaces. A brass switch plate, lamp pull, or door fitting is meaningfully cleaner than the stainless steel equivalent. For high-touch fixtures (bedside lamps, hallway sconces) this matters more than the brochures usually mention.
04 A spectrum the eye reads as warm
Brass reflects light selectively across the visible spectrum — absorbing slightly more blue and green, reflecting more red and yellow. The result is that any light source mounted in or near a brass fixture acquires a faint warm wash. We design the LED specification with this shift in mind: a 2700K bulb behind brass reads as roughly 2550K to the eye, the colour of late-afternoon window light.
Six finishes. Six different conversations
between metal and room.
A single block of H65 can be finished in a dozen ways — and the finish, more than any other variable, decides the personality of the fixture. The atelier maintains six standard characters and adds custom patinas on request. Physical samples are sent before final order on every project of three fixtures or more.
- Reflectivity~85%
- SealantIncralac
- Best forFormal rooms
- Reflectivity~35%
- TextureLinear satin
- Best forMost projects
- ToneAmber to black
- VariationEach unique
- Best forVintage interiors
- Reflectivity~5%
- EdgesBrass glint
- Best forModern luxe
- SealantNone
- PatinaContinuous
- Best forHeritage homes
- PlatingSatin nickel
- BodySolid H65
- Best forCool palettes
The seventeen you can actually order
The six characters above describe how a finish behaves. What you specify is one of seventeen numbered finishes — or a custom patina grown to match a sample you send us.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
Finishes 01–17 · brass, bronze, iron, steel, nickel, chrome, black · custom patinas matched on request
Order by number, not by name. "Antique brass," "aged brass," "burnished brass" — ask five workshops what those mean and five different metals come back. Finish 04 is the same physical sample in our studio, on the atelier bench, and on your packing list.
And because no screen renders metal honestly, we ship the physical panels before anything is committed. Hold them against your cabinetry and wall paint, at the hour you actually use the room — then send the number.
Color that is grown, not painted on.
A brass finish is not a coat of paint — it is a controlled chemical reaction on the surface of the metal itself. Where a sprayed lacquer sits on top and eventually chips, a true patina is the brass reacting with sulphur, ammonia, or acid salts until its surface ions shift colour. The tone you see is the metal, transformed. That is why a patinated Radilum fixture deepens with age instead of peeling — and why every piece is coloured by hand, one at a time.
Seven stages, ten to twelve weeks,
and nothing exists before you choose.
A Radilum fixture is not pulled from a shelf. It is tooled, cast, polished, patinated and sealed after you order it — which is why the finish can be anything you want, and why the whole thing takes twelve weeks rather than two days.
One project specialist carries the commission from brief to install. There is no handover between sales, design, production and freight; the person who answers your first email is the one who sends you the polishing photographs.
The four stages you will see photographed
Stages three through six happen in the atelier, and each one arrives in your inbox as a timestamped photograph. Not because pictures sell anything — twelve weeks is a long time to trust a workshop on the other side of the world, and a photograph is the only thing that proves what we described actually happened. They come whether or not you ask.
Steel cut from your drawing
The signed-off render becomes a parametric model, then a five-axis tool path, then a steel mould cut in our own shop. Nothing is outsourced here — a tolerance lost at this stage cannot be recovered later.
H65 — the shell-casing alloy
65% copper, 35% zinc: the brass first specified for military cartridges because it absorbs shock without splitting. Every cast piece is annealed so it will not crack a decade from now.
Colour is grown, not sprayed
One technician carries your fixture through every grit, then the patina bath. The reaction is arrested within seconds of reaching tone, and high points are rubbed back by hand. Their mark is etched on the fitting plate.
Multi-layer sealant, tested for 25 years
Three coats of imported Incralac — the conservation lacquer museums use on bronze sculpture. Accelerated-aging tests project 25+ years tarnish-free — or we skip this stage entirely, by request.
The swatch is the cheapest step in the entire commission and the only one that prevents a remake — the finish is the single variable that cannot be corrected once the fixture is built.
Five archetypes — the working portfolio.
Most projects begin from one of five standard categories. Every category scales from intimate residential to full-room hospitality; every category accepts any of the seventeen finishes; every category ships UL-listed for North America (CE/SAA available on request).
Three principles drawn from two centuries
of American interior design.
The Radilum American Brass Collection is shaped by three lineages — Federal-era neoclassical proportion, the early-20th-century Arts & Crafts movement, and the mid-century industrial vernacular. The result is a portfolio that reads as American not because it is decorated with eagles and stars, but because it carries the same restraint and structural honesty that those three traditions share.
Restraint & Proportion
From Federal-era cabinetry: symmetry, balance, restraint. Arms stepped at golden-ratio intervals. Canopies sized to match the column they descend from. Nothing is decorative for decoration's sake. The grandeur is in the proportion, not the ornament.
Structural Honesty
From the Arts & Crafts vocabulary: function expressed, never disguised. Joinery shows. Fasteners are visible and intentional. The arm of a sconce is shaped because it must support a bulb — and that shape is the design. Nothing pretends to be what it isn't.
Classic Shades
From mid-century industrial: opal milk glass, fluted glass, woven linen, perforated metal mesh. Each shade has a hundred-year vocabulary behind it. We pair the shade to the fixture's intended room — not the photographer's preference for what reads on social media.
Begin with a brief, or a finish sample.
Whether you need a single bedside sconce or a hundred matched fixtures for a hospitality build-out, the first step is the same — write to us. The project specialist who reads your email is the one you'll work with from brief to install. Every email gets a real reply within 24 hours.
Mounting heights for wall lamps
Where the light sits on the wall decides whether it reads as decoration or as useful light.
Size chart
| Size |
| area XS |
| Room XS |
| Size | DIA 2"-6" | DIA 6"-12" | DIA 12"-18" | DIA 20"-24" | DIA 24"-32" | DIA 32"-40" |
|---|---|---|---|---|---|---|
| area | 32-54 FT | 54-107 FT | 107-161 FT | 161-215 FT | 215-269 FT | 269-378 FT |
| Room | BATHROOM/AISLE | DINING ROOM | KITCHEN | BEDROOM | LIVING ROOM | COMMERCIAL INTERIOR |
* Sizes are American and expressed in inches.
Complete the room
Pieces that live well with the Dionis
From the same French Brass Wall Sconce line — chosen so the room reads as one.
Recently viewed
Welcome offer
Ten percent off your first order
Enter the code at checkout. Applies to the full order, including custom finishes.
Trade & designers
Trade Program
Net pricing on every fixture, finish samples, 3D models and a dedicated project contact — for interior designers, architects, hospitality and developers.
Apply for a trade account