Floor Lamp · Gyroscopic Acrylic Disc · Edge-Lit LED · TRIAC Dimmable · Black or White
The Morrison is built around a single design insight: LED light directed into the edge of a flat translucent acrylic disc travels laterally through the material, causing the entire face of the disc to glow as one uniform, luminous surface. The disc appears solid white when unlit; when lit, it becomes a flat plane of even, diffused light — no visible source, no hotspot, no directionality within the disc itself.
The disc is mounted on a gyroscopic axis within the wrought iron frame, allowing it to be tilted to any angle — flat for ceiling-directed ambient light, angled for wall-wash, or anywhere between. The integrated LED is TRIAC-dimmable as standard, controllable from full output down to a soft residual glow. Two sizes and two finishes — Black or White — share the same mechanism and 80 cm base diameter.
Key Features
Edge-Lit Disc
LED enters through the disc edge — the full face glows as a uniform white plane with no visible source.
Gyroscopic Tilt
Disc pivots freely on its axis — direct light at the ceiling, wall, or any angle in between.
TRIAC Dimmable
Built-in dimming as standard — compatible with TRIAC wall dimmers, no special driver required.
Finish — Choose at Checkout
Black
Matte black wrought iron frame — the glowing white disc reads as a luminous object floating within a dark structural geometry. Suits contemporary and minimalist interiors.
White
White wrought iron frame — the disc and frame read as a continuous tonal composition when unlit, with the luminous disc emerging cleanly when switched on. Suits light, Scandi, and all-white interiors.
Size — Choose at Checkout
Standard living rooms and bedrooms. The 50 cm disc provides generous ambient coverage for spaces up to approximately 20 m².
Open-plan spaces, larger living rooms, and positions where the lamp is the primary light source or a strong visual anchor.
TRIAC dimming — included as standard. The Morrison ships with a TRIAC-compatible integrated LED driver. Connect to any standard TRIAC wall dimmer switch (sold separately — confirm it is rated for LED loads) to dim from full output to a residual soft glow. No additional driver or smart switch is required. The plug-in cord also works with an in-line cord dimmer as an alternative.
Plug-in — no hardwiring required. The 150 cm / 59″ cord connects to a standard wall outlet. Position freely near any outlet.
Specifications
| SKU | RDF-175227 |
| Sizes | Small: ∅50 disc · ∅80 base · H163 cm · Large: ∅70 disc · ∅80 base · H168 cm |
| Finish Options | Black · White |
| Disc | Translucent white acrylic · Edge-lit · Gyroscopic axis mount |
| Frame | Wrought iron |
| Light Source | Integrated LED · Non-replaceable · Built-in TRIAC dimming |
| Dimming | TRIAC-compatible · Standard wall dimmer or in-line cord dimmer |
| Power Supply | Plug-in · 150 cm / 59″ cord |
| Voltage | AC 110–240V · Universal |
| Best For | Living rooms · Bedrooms · Studios · Minimalist and contemporary interiors |
Downloads
FAQ
How does edge-lighting work? +
An LED strip is positioned along the rim of the acrylic disc — not on its face. Light enters the disc laterally through the edge and undergoes total internal reflection, bouncing repeatedly through the material until it reaches the disc surface. The surface is treated with micro-etching or diffusion particles that scatter the light outward uniformly. The result is a disc that glows evenly across its entire face from a single edge-mounted source — no hotspot at the LED position, no visible source, just a flat plane of diffused light.
How far can the disc tilt? +
The gyroscopic mounting allows the disc to tilt freely through a wide range — from fully horizontal (disc face directed at the ceiling for broad uplighting) to nearly vertical (disc face directed at a wall for a wall-wash effect). The most common position is a moderate upward tilt that blends ambient ceiling light with indirect side diffusion. The disc can be set to any angle manually and holds position once adjusted.
Small or Large — which suits my space? +
The Small (∅ 50 cm) suits standard-size living rooms and bedrooms as a primary or secondary floor lamp. At 50 cm the disc is visually substantial without dominating the room. The Large (∅ 70 cm) is for spaces where the lamp is the main ambient light source or where it is intended as a strong visual anchor — open-plan areas, large living rooms, and rooms with high ceilings. Both versions are the same height (roughly 163–168 cm) and share the same 80 cm base diameter.
What dimmer switch is compatible? +
Any standard TRIAC LED dimmer switch rated for the lamp's wattage (check the spec sheet for exact wattage). Look for a wall dimmer labeled “LED compatible” or “trailing edge” — avoid older incandescent-only dimmers which will cause flickering. Alternatively, a plug-in in-line cord dimmer (with a rotary or slider control on the cord itself) can be used between the lamp's plug and the wall outlet, requiring no wall switch modification at all.
- Unique shape design
- Made responsibly
- High quality material
- Tested for durability
CARE
CARE
- Dust with a soft, dry cloth.
- To protect finish, we do not recommend the use of household cleaners or abrasives.
- Do not exceed specified wattage.
SHIPPING & RETURN POLICY
SHIPPING & RETURN POLICY
Enjoy free shipping on all products. With Front Door Delivery, your item ships from our Distribution Center via UPS within 2–3 business days and arrives at your home in 4–6 weeks. Eligible items may be returned within 30 days of receipt. Made-to-order items are not eligible for return.
In our workshop
Made to order, shipped insured
Every fixture is built or cut when you order it — 2–4 business days for metal, 3–5 for stone, 3–4 weeks for hand-blown glass. Then sea freight, customs handled by us, tracked to your door in about 4–6 weeks. Need it sooner? Express air, 1–3 weeks, priced at checkout.
Made your way
Nothing here is fixed
Change the finish, the colour, the stone, the size — or send us a shape.
Design services
Free whole-home lighting plans
Send floor plans or photos; a Radilum designer returns a room-by-room plan with fixture, size and mounting height — usually within 2 business days.
Fast Shipping
4-6 weeks for delivery
North American Certification
North American Certification Overview
Safety Payment
Secure payment with Multiple Credit Cards.

The workshop story
Made to order, one at a time
Every Radilum fixture is made when you order it — metal cast and finished by hand, stone cut from its own block, glass blown in small batches. That is why lead times are counted in days and weeks rather than hours, and why small variations between pieces are part of the design.
Choosing a table or floor lamp
A lamp is sized to the surface and the seat next to it, not to the room.
Explore by material
Explore by room
Welcome offer
Ten percent off your first order
Enter the code at checkout. Applies to the full order, including custom finishes.
Trade & designers
Trade Program
Net pricing on every fixture, finish samples, 3D models and a dedicated project contact — for interior designers, architects, hospitality and developers.
Apply for a trade account










































Natural marble
Alabaster
Travertine
Hand-blown glass
Kitchen & island
Dining room
Entry & hallway
Staircase & foyer
Bedroom
Office & study