Ottone anticato · Cornice per quadri · Applique per galleria
Una cornice in ottone anticato dalle linee essenziali che accoglie la tua foto, stampa o opera d'arte preferita — e la illumina. La lampada integrata avvolge l'immagine in una luce calda e raffinata, simile a quella di una galleria, conferendo a qualsiasi quadro un aspetto curato. Cambia l'opera quando desideri; la cornice resta, il risultato cambia.
Guarda in Azione
Descrizione del prodotto
Lunghezza — Scegli al Checkout
Le tre lunghezze condividono la medesima altezza di 15,5 cm e una profondità di 15,5 cm — seleziona la lunghezza più adatta alla tua opera e allo spazio disponibile.
Piccolo
L 45 cm
L 17.7″
H 15,5 cm · Profondità 15,5 cm
Medio
L 58 cm
L 22.8″
H 15,5 cm · Profondità 15,5 cm
Grande
L 76 cm
L 29.9″
H 15,5 cm · Profondità 15,5 cm
Materiali e Artigianalità
Ottone Anticato
Corpo in ottone massiccio con patina anticata rifinita a mano in tonalità calda.
Cornice Fotografica
Accoglie una foto, stampa o opera d'arte — cambia i quadri per rinnovare il tuo spazio.
Luce da Galleria
La luce integrata direzionata avvolge delicatamente l'opera — illuminazione elegante e curata.
Note Prodotto
| Dimensioni della plafoniera | Piccola: L 45 × H 15,5 cm / L 17,7″ × H 6,1″ Media: L 58 × H 15,5 cm / L 22,8″ × H 6,1″ Grande: L 76 × H 15,5 cm / L 29,9″ × H 6,1″ |
| Sporgenza dalla parete | 15,5 cm / 6,1″ — costante per tutte le dimensioni |
| Dimensione della scatola di collegamento | L 16 × H 7 cm / L 6,3″ × H 2,8″ |
| Materiale struttura | Ottone massiccio |
| Finitura | Ottone anticato |
| Tipo di portalampada | Candelabro E12 o E14 |
| Lampadina inclusa | No — venduta separatamente |
| Tipo di montaggio | Montaggio a parete · Hardwired · Orientamento orizzontale |
| SKU | RDW-212218 |
Prima dell'Installazione
La Pania si fissa a una scatola di collegamento incassata nella parete di dimensioni L 16 × H 7 cm / L 6,3″ × H 2,8″. Queste dimensioni sono leggermente superiori a quelle di una scatola a parete standard monofase.
Se la tua scatola esistente ha dimensioni diverse, l'elettricista può installare un adattatore per scatola di collegamento o una nuova scatola incassata prima del montaggio. Ti consigliamo di confermarlo con l'installatore prima di ordinare.
Installazione
- Installazione murale cablata — è consigliato un elettricista abilitato.
- Richiede una scatola di collegamento incassata di dimensioni L 16 × H 7 cm / L 6,3″ × H 2,8″. Tutto l'hardware di montaggio è incluso.
- Progettato per il montaggio orizzontale a parete — la cornice è orientata in formato orizzontale, con la luce integrata lungo il bordo superiore.
- L'opera viene inserita dal retro attraverso un pannello di supporto rimovibile — i dettagli completi si trovano nella guida di installazione.
- Idoneo per ambienti interni secchi e umidi. Non adatto a zone doccia, ambienti bagnati o uso esterno.
Domande frequenti
Come inserisco o cambio la foto? +
La cornice ha un pannello di fondo rimovibile che ti permette di far scorrere le opere d'arte dentro e fuori dal retro. Il processo è lo stesso sia che tu stia appendendo il dispositivo per la prima volta sia che tu stia cambiando le stampe in seguito. La guida di installazione copre i passaggi esatti.
Quale dimensione di opera d'arte si adatta a ogni lunghezza? +
L'apertura della cornice interna è leggermente più piccola della lunghezza esterna. Come indicazione approssimativa, l'opera d'arte dovrebbe essere approssimativamente 3–5 cm più corta della lunghezza esterna e circa 10 cm di altezza. Per il dimensionamento preciso, consulta il foglio delle specifiche prima di ordinare, oppure ritaglia la stampa in base alle esigenze.
E se la mia scatola di giunzione a muro ha dimensioni diverse? +
La Pania richiede una scatola di giunzione incassata di L 16 × A 7 cm / L 6,3″ × A 2,8″. Se la tua scatola esistente è più piccola o di forma diversa, l'elettricista può installare una scatola incassata più grande o un adattatore per scatola di giunzione. Conferma questo passaggio con l'installatore prima di ordinare.
Quali lampadine consigliate? +
Lampadine LED a base E12 o E14 a candela in bianco caldo (2700K), 3–4W ciascuna (≈equivalente a 40W a incandescenza). Le dimensioni più lunghe utilizzano più lampadine — il numero esatto di lampadine per variante è elencato nella scheda tecnica.
Questo apparecchio è dimmerabile? +
L'apparecchio stesso è compatibile con il dimmer. Abbina lampadine LED dimmerabili E12/E14 con un interruttore dimmer compatibile TRIAC (ad es. Lutron, Leviton Decora). Le lampadine standard non dimmerabili funzioneranno solo alla massima luminosità.
Come prendo cura della finitura in ottone antico? +
Pulisci con un panno morbido e asciutto. Per le impronte digitali, un panno in microfibra leggermente inumidito seguito da un'asciugatura accurata è appropriato. Evita detergenti abrasivi, sostanze chimiche aggressive e lucidi per ottone — la patina antica è intenzionale e la lucidatura la rimuoverebbe.
Download
Customer Questions
Can the lamp head be adjusted or moved? +
No, the lamp head is fixed and cannot be moved or adjusted at the mounting point. The fixture is designed for horizontal wall mounting with the integrated light along the top edge.
Downloads
Need a 3D file or another document? Ask a designer — it’s free; 3D files are drawn for your project, so allow a little time.
- Unique shape design
- Made responsibly
- High quality material
- Tested for durability
CARE
CARE
- Dust with a soft, dry cloth.
- To protect finish, we do not recommend the use of household cleaners or abrasives.
- Do not exceed specified wattage.
SHIPPING & RETURN POLICY
SHIPPING & RETURN POLICY
Enjoy free standard shipping on every order, insured and tracked to your door. Eligible items may be returned within 30 days of receipt. Made-to-order items are not eligible for return.
The Pania picture light
Turn any wall into a gallery.
Solid brass, hand-finished, and made for one beautiful job: making the art you love impossible to walk past. Hang it over a painting, a portrait or a mirror and watch the whole room change.


Drag to compare
Same painting. Same wall. One switch.
A ceiling light flattens art. A picture light pours down the canvas, so brushstrokes catch, gilding glints and colors look the way the artist meant.

Look closer
Then closer still.
Every ornament on Pania comes from Greek and Roman architecture.

The same leaf carved atop every Corinthian column. It has crowned palaces, ceilings and fine furniture for over 2,000 years. Now it holds your light.

A fan of leaves around a central flower, seen on Greek temples and Federal-style American doorways. Raised in real relief, so it catches the light.

Clipped corners and a beaded rim borrowed from classical mantels. Pretty from the front, and it neatly hides the wall box behind it.

Loosen the thumb screw, tilt the shade, tighten. Aim the light exactly where your art needs it, no tools required.
Inside the workshop
Born in fire. Finished by hand.
We took our camera onto the workshop floor and followed a Pania from raw brass to its first glow. Press play, then follow the six steps below.
- Step one
Cutting the brass
Solid brass tube and sheet are cut to length for each size. A 29.9″ shade starts life as 29.9″ of solid metal.
- Step two
Casting the ornaments
The acanthus arm, palmette panel and end finials are cast in brass, then cleaned so every leaf edge stays crisp.
- Step three
Ornament brazing
Each ornament is set by eye, then fused to the shade with a torch. It becomes part of the metal, never glued on.
- Step four
Finishing by hand
Seams are filed and the surface is brushed by hand. This is where the soft, uneven depth comes from, so no two are exactly alike.
- Step five
Spray finish and curing
The antique tone goes on in even coats and is cured, sealing the brass against fingerprints and tarnish.
- Step six
Wiring and first light
Sockets are wired, the swivel is set, and every lamp is switched on before it leaves the bench.
Every piece is touched by hand.
That is why it looks warm, not perfect.
Size finder
Your perfect length in five seconds.
Curators follow one simple rule: the light should span about half to two-thirds of the frame. Type your frame’s width (outside edge to outside edge) and we’ll do the math.
Most framed landscapes over a sofa are 30–48 in wide.
Small · 17.7″
L 45 cm × H 6.1″. Portraits, small oils and single vanity mirrors up to about 32″ wide.
Medium · 22.8″
L 58 cm × H 6.1″. The all-rounder for art from about 32″ to 42″ wide.
Large · 29.9″
L 76 cm × H 6.1″. Statement landscapes, double vanities and over-mantel pieces 42″ and up.
All three share the same 6.1″ height and 6.1″ wall projection. Need a length in between? Radilum makes custom sizes on request.
Room by room
Where will yours glow?
Paintings are just the start. Pick a room to see where Pania fits, how big the room can be, and which length to choose.

Along the stacks
In a library, every portrait between the shelves deserves its own light. A row of Panias turns a long room into a private gallery after dark.
- Room size
- Libraries, halls and dens, about 150–400 sq ft
- Mount over
- Portraits and paintings hung between bookcases
- Art width
- 24–40″ wide
- Mount height
- Shade 3–6″ above the top of each frame

Above the console
The first thing guests see when they walk in. On a dimmer, Pania turns a portrait into the warmest welcome in the house.
- Room size
- Living rooms and entryways, about 200–400 sq ft
- Mount over
- Art above a console, writing desk or sofa
- Art width
- 24–42″ wide
- Mount height
- Shade 3–6″ above the top of the frame

Over the mirror
Light from above falls on your face, not just the glass. Damp-location rated, so a vanity feels like a boutique hotel. Just keep it out of the shower.
- Room size
- Powder rooms to primary baths, about 40–150 sq ft
- Mount over
- A vanity mirror, centered on the sink
- Mirror width
- 24–32″: Small · 32–42″: Medium · 42″+: Large
- Mount height
- 2–4″ above the mirror. Damp areas only, not in the shower

Beside the bed
Over a small print above the nightstand, Pania doubles as a soft evening glow. Nearly a third of Pania orders are for two or more, so hang one on each side for perfect symmetry.
- Room size
- Bedrooms, about 120–250 sq ft
- Mount over
- Art or a mirror above each nightstand
- Art width
- 14–28″ per side
- Mount height
- Shade 3–6″ above each frame

Behind the desk
On video calls, the wall behind you is your backdrop. A lit portrait says “I have taste” before you say a word, and adds soft fill light for the camera.
- Room size
- Home offices and studies, about 80–150 sq ft
- Mount over
- A painting on the wall behind the desk, or the centerpiece of a gallery wall
- Art width
- 18–32″ wide
- Mount height
- Keep the art at eye level on camera, lamp 3–6″ above

Above the sideboard
Dim the chandelier, leave Pania on, and dinner instantly feels candlelit. The painting becomes part of the conversation.
- Room size
- Dining rooms, about 150–300 sq ft
- Mount over
- Art above a sideboard or buffet
- Art width
- 32–48″ wide
- Mount height
- Shade 3–6″ above the frame, centered on the sideboard
Installation
Hang it like a curator.
Four rules the pros use, so your art looks gallery-lit on day one.
Center it on the art
Hang the art first, then place the wall box on the frame’s center line, not the wall’s.
Mount it just above the frame
As a guide, the shade should sit about 3–6″ above the top edge. Too high and the light misses the canvas; too low and it crowds the frame.
Aim for the top third
Tilt the swivel joint so the brightest light lands on the upper third. It falls off naturally toward the bottom, just like in a museum.
Choose warm, low-heat bulbs
E12 candelabra LEDs at 2700K, around 3–4W each, glow like candlelight and stay cool near canvas and paper.
Good to know
Care, and your questions answered.
Please don’t polish it.
The darker tones in the crevices and the soft gold on the high points were put there on purpose. Brass polish would strip them back to bright yellow metal.
Dust with a dry, soft cloth. For fingerprints, use a barely damp microfiber cloth and dry it right away. That’s all it needs, for decades.
Will the light damage my painting?
Not with LED bulbs. LEDs give off very little heat and almost no UV, which is why museums use them. Avoid old incandescent bulbs near valuable originals or works on paper.
Can I hang it over a mirror instead of art?
Yes, and many customers do. It is rated for damp locations, so it is suitable above a bathroom vanity. Keep it out of shower enclosures and other wet zones.
Is it plug-in or hardwired?
Hardwired. It mounts over a recessed wall junction box and is controlled by your wall switch. We recommend a licensed electrician for installation.
Which bulbs should I buy?
E12 candelabra-base LED bulbs in warm white (2700K), 3–4W each, roughly a 40W incandescent equivalent. Longer sizes take more bulbs. Bulbs are not included.
Can I dim it?
Yes. Use dimmable E12 LED bulbs with a dimmer made for LEDs, such as Lutron or Leviton models. Non-dimmable bulbs will run at full brightness only.
Is it really solid brass?
Yes. The body, arm, shade and backplate are brass throughout, not plated steel or zinc. You will feel the weight the moment you unbox it.
Can I get a different length or finish?
Radilum can make custom lengths, and other finishes from our Finishes Library or a Pantone color are available on request. Email us before ordering and we will confirm the details.
Your wall is waiting
Every wall has a story. Light yours.
Solid brass, finished by hand, in three lengths. Free standard shipping to the US.
In our workshop
Made to order, shipped insured
Every fixture is made when you order it — usually 1–3 weeks in our workshop, a little longer for hand-blown glass and large pieces. Then it ships insured by sea, customs handled by us, with tracking to your door: most orders arrive 5–7 weeks after ordering. Need it sooner? Express air takes 2–4 weeks in total, priced at checkout.
Made your way
Nothing here is fixed
Change the finish, the colour, the stone, the size — or send us a shape.
Design services
Free whole-home lighting plans
Send floor plans or photos; a Radilum designer returns a room-by-room plan with fixture, size and mounting height — usually within 2 business days.
Free Shipping
Free standard shipping, insured and tracked to your door.
North American Certification
North American Certification Overview
Safety Payment
Secure payment with Multiple Credit Cards.

The iron & brass story
Cast, chased and finished by hand
Our brass and iron fixtures are cast, chased and finished in our own workshop — gold-leafed, bronzed or lacquered by hand, which is why no two carry exactly the same glow. Colour is grown in the finishing bath rather than sprayed on, then sealed to age gracefully. Choose a finish above, or ask for any other metal finish from the Finishes Library.
Mounting heights for wall lamps
Where the light sits on the wall decides whether it reads as decoration or as useful light.
Complete the room
Pieces that live well with the Applique
From the same Applique in ottone francese line — chosen so the room reads as one.
Recently viewed
Welcome offer
Ten percent off your first order
Enter the code at checkout. Applies to the full order, including custom finishes.
Trade & designers
Trade Program
Net pricing on every fixture, finish samples, 3D models on request and a dedicated project contact — for interior designers, architects, hospitality and developers.
Apply for a trade account




































































