This is an oversized statement floor lamp at H 210 cm (82.7″) tall — substantially taller than a standard floor lamp. It's built for hotel lobbies and lounges, restaurant entries, gallery floors, photography studios, retail spaces, and large residential great rooms (over 30 m² / 320 sq ft) where a standard-scale floor lamp would feel undersized. Verify ceiling height of at least 9 ft (2.7 m) and 4+ ft of free floor space around the base.

No — this is a plug-in floor lamp with a 150 cm (59″) cord that plugs into any standard wall outlet. No hardwiring, no junction box, no electrician. Just unfold the arm joints, install your bulb, plug in. This makes it easy to relocate the lamp around a space or take it with you when changing properties.

The lamp has four points of articulation: a 360° rotating base, two spring-tensioned arm joints (one at the base, one at the elbow), and a pivoting shade mount. Each spring-tensioned joint uses internal tension springs to hold the arm in any position you set — push the arm up or down and the springs lock it in place via friction. The shade can be aimed in any direction. Together, this gives you full control over where the light is directed.

Yes, with the right setup. The fixture takes a single E26 (US) or E27 (EU) screw-base bulb. Use a dimmable LED bulb paired with an inline cord dimmer (between the lamp and the wall outlet) or a smart plug for app-based dimming. Warm white 2700K–3000K is recommended to flatter the matte black metal and warm the bounce-light through the white interior shade.

Light projects from a single bulb inside the directional drum shade. The shade is matte black on the exterior and white on the interior — light bounces off the white interior and emerges as a focused, warm, slightly diffused beam from the open shade end. This is task light, not ambient — best suited to illuminating a specific area (a workspace, a seating zone, an art installation) rather than filling a whole room.

Yes — the oversized scale and statement-piece quality make it well-suited to hotel lobbies, restaurant entries, retail floors, photography studios, and gallery spaces. The plug-in cord makes it relocatable across a property as installation needs change. For project-quantity orders we coordinate finish specification and lead times directly. Please contact us with your project specification at the earliest stage.

One E26 (US) or E27 (EU) screw-base bulb. We recommend a warm-white 2700K–3000K LED at 60W incandescent equivalent (about 8–10W actual draw) — A19 or A21 globe shape works well. Avoid daylight (5000K+) which gives a clinical cast that clashes with the warm-toned bounce reflection inside the shade.